Free shipping in Singapore and Hong Kong for orders over $59! Free shipping in Singapore and Hong Kong for orders over $59!
Call
+6588663351
Contact
info@taxibaby.sg
Store info

Mon-Fri, 9:30am-4:30pm

Directions

10 Jalan Kilang Timor

#03-04A LTH Building

Singapore 159306

10 Jalan Kilang Timor

#03-04A LTH Building

Singapore 159306

Mon-Fri, 9:30am-4:30pm

Taxi Baby SG

Taxi-friendly locking clip

$29.00 $29.00

Description

The InfaSecure SafeGrip belt clamp is a unique little clip which clamps over the vehicle sash belt (the part that normally goes across your body and over your shoulder), right up next to the seat belt buckle. It’s designed to stop the seat belt from feeding through the buckle (it can help achieve a tighter, more solid installation of your child's car seat), and is a taxi-friendly alternative to a premium or standard locking clip.  Ships from Singapore; prices in SGD.

More information

The InfaSecure SafeGrip belt clamp can be used in the place of a locking clip (also known as a gated buckle) to lock the lap-portion of the vehicle seat belt, so that you can achieve a tighter, more solid installation of your child's car seat. The SafeGrip works differently from regular locking clips, in that it only clips onto the shoulder belt section of the seat belt (regular locking clips hold the lap and shoulder portions together). This means that: (1) it can be installed without having to unbuckle the vehicle seat belt, making it much quicker for taxi installations, and (2) it can be used to lock the seat belt when using a European belt-routing method to install a car seat (regular locking clips only allow the American belt-routing method).

Helpful Tutorials

To use the SafeGrip belt clamp with a convertible car seat:

  1. Thread the vehicle seat belt through the belt path on the car seat, then buckle the seat belt.
  2. Pull on the sash belt (the shoulder-portion of the seat belt) to remove the slack from the lap-portion of the seat belt. Pull on the sash belt firmly to get a secure installation - it may help to rock the car seat side to side.
  3. Place the SafeGrip on the sash belt only, as close to the buckle as possible.
  4. Retract any excess sash belt back through the belt path.
  5. Test your installation: the car seat should not move more than an inch on the vehicle seat when you tug on it. If necessary, remove the SafeGrip and repeat from step 2.

Manufacturer's Warranty

There is no manufacturer's warranty for the taxi-friendly locking clip.

About The Brand

What We Do

We’re a 4th generation, 100% Australian owned and operated family business. We’re just like you – parents, grandparents, aunts, uncles, brothers and sisters. We want what is best for our own children, and that hard-wired protective nature drives everything we do.

We create safe, stylish and affordable child restraints and nursery products. We offer expertly engineered, high quality products at realistic, affordable prices, so that all families can benefit from our unique solutions. We create and offer you the products that our own families use.

We have the best team, and we develop and deploy the best technologies. We use the most prestigious 3rd party testing laboratories, and we have an innate understanding of what parents and carers need, because we’re parents too.

Combined, we engineer the safest and most advanced child restraints and nursery products to keep your family secure and protected.

What We Stand For

We believe every child is entitled to safety and we strive to be the leader in our industry. We have a determination to educate our customers and the wider market about best practice and car safety for children.

We are committed to open communication and being available to offer advice and answer questions for all parents and carers. We are dedicated to innovating, developing the best technology, and engineering and manufacturing the safest child restraints and nursery products to keep all children safe.

Our Innovations

We’re constantly at the forefront of innovation, developing unique new ways to make parents’ lives easier, and our precious children safer. Just some of our firsts include;

- The first 0 to 4 compact convertible car seat in Australia.

- The development of the top tether snap keeper clip.

- The first revolving car seat in Australia.

- The first pull-out bath change table solution in Australia.

- The first (and only) 0 to 8 convertible car seat.

- The first folding untethered booster.

- The first Type G child restraint designed to harness children up to 8 years old.

Our world class research and development team have been at the forefront of car safety since 1977, with a combined 120 years experience in the design, development and testing of child restraints.

We’ve also had a very significant influence on the Australian Standard.

We pioneered the current methods of energy attenuation testing (testing typically used in bicycle and motorcycle helmet testing) as part of our ongoing product improvement and research and development programs, even though there was no requirement in the standard for such testing at that time. As a result, it’s now a mandatory performance requirement for all child restraints certified to the Australian Standard.

Our anti-submarining designs played a huge part in shifting the focus onto the critical feature of anti-submarining, which is now classed as one of the key performance requirements for all child restraints, and our Air Cocoon Technology manufacturing techniques have also helped usher in much more strict requirements for side impact protection.

Our History

We’ve changed a lot over the last 60 years, from children’s wear wholesale in the 1950’s, a retail baby store in Eastwood NSW in the late 1960’s, baby furniture and pram wholesale in the 1970’s, and Australian manufacture of tubular and vinyl baby products in the 1980’s.

In 1990, we started selling the Secure range of child restraints, bringing the first compact 0 to 4 convertible car seat to the Australian market. In addition to that, we developed the first multi-recline car seat for the Australian

market.

Infa Products and Secure’ Child Restraints merged in 2007, becoming the single largest Australian owned and operated child restraint company in the country.

Throughout our long history, one thing has remained consistent – providing parents with innovative, high quality, safe products at an affordable price.

Returns

Keeping children safe is our utmost priority. As such, we have a strict no-return policy for child safety products as it is not possible to ascertain the complete history (how it was used/if any parts of the product might be compromised) of the product before considering resale.

To ensure that your product is suitable, simply contact us.

For more information on our Returns Policy, click here

Customer reviews

Delivery

We ship our products worldwide. All countries are set up in our online store so you’ll receive cost and delivery estimates when you enter your address.

We offer two international shipping options: Registered Mail and Express Shipping via DHL Express (this is the fastest, most reliable and dependable courier we've ever used), and three local shipping options: Express Delivery via Ninja Van, Standard Shipping via Ninja Van or Singapore Post, or self-collection.

For delivery timeframes for each country, please take a look at our shipping policy.

Share
Taxi-friendly locking clip
$29.00 $29.00

Taxi-friendly locking clip

Taxi-friendly locking clip
Added to cart Taxi-friendly locking clip
View product details